West Vancouver bathroom remodels are not the same project as anywhere else in the Lower Mainland. The fixtures are higher-spec, the millwork is solid-wood, the counters are book-matched stone. The work behind the walls follows. Here is what 2026 actually costs.
Ready for a quote?
See our full pricing tiers, scope ranges, and FAQs for West Vancouver luxury bathroom remodels on our West Vancouver Bathroom Remodel service page.
The three luxury tiers
Tier 1: Premium guest bath — $50,000 to $75,000
The starting point for West Van bathroom work. Fixtures from Hansgrohe, Brizo, or Kohler premium lines. Quartzite or premium quartz on the counter. A semi-custom vanity in painted MDF or shaker-style solid hardwood. Heated tile floor. Designer pendant lighting. Walk-in shower with frameless glass and Schluter Kerdi waterproofing throughout. The bones of a luxury bathroom but in a guest-bath footprint.
Four to five weeks of build. The premium over an equivalent inland guest bath sits mostly in the fixtures (typically 2x to 3x the cost of mid-tier) and the stone counter (premium quartz at $80 to $130 per sqft vs $50 to $70 for standard).
Tier 2: Full master remodel — $75,000 to $110,000
This is the most-requested West Van bathroom format. Curbless shower with a linear drain and full frameless glass enclosure. Double vanity in custom solid-wood millwork with hand-applied finish. A freestanding tub from MTI or Victoria + Albert. Heated floors. Smart fixtures (Toto Neorest, Brizo MagneTite, etc.). Designer lighting plan with dimming controls. Stone counter and feature wall in matching quartzite or marble.
Standard ask in Ambleside, Dundarave, and Caulfeild luxury renovations. Seven to eight weeks of build. Millwork is the long pole — solid-wood cabinetry typically 6 to 8 weeks to fabricate.
Tier 3: Full spa-bathroom — $110,000 to $150,000+
Steam shower with integrated bench and chromotherapy lighting. Book-matched marble or quartzite slabs from a single block (matched veining flowing across the floor, walls, and counter as one continuous pattern). Custom solid-wood millwork in walnut, white oak, or rift-sawn solid lumber. Full Sub-Zero medicine cabinets with integrated mirror lighting. In-floor heating throughout with WiFi-controlled thermostats. Smart toilet (Toto Neorest 750H or Kohler Numi). Multi-zone exhaust with humidity sensors.
Standard in British Properties, Whitby Estates, and Chartwell luxury rebuilds. Nine to ten weeks of build time on top of 8 to 12 weeks of millwork and stone fabrication lead.
Why the premium tier sits where it does
The most useful way to understand a $110K+ West Van bathroom budget is to break it into trades:
- Millwork — $30K to $50K. Solid-wood custom cabinetry with painted or stained finish, built to the appliance and fixture spec sheets. Fabricated in our supplier's shop over 6 to 8 weeks.
- Stone counters + feature walls — $12K to $25K. Book-matched marble or quartzite from a single slab block, fabricated and templated to fit.
- Fixtures and appliances — $15K to $30K. Smart toilets, premium faucets, freestanding tubs, steam units, integrated cabinet lighting.
- Tile + flooring — $8K to $18K. Large-format porcelain, natural stone, or designer tile with custom inlays.
- Plumbing + electrical rebuild — $8K to $15K. Full re-pipe, new electrical service if needed, smart fixture integration.
- Labor + project management — $25K to $45K. 9 to 10 weeks of skilled trades onsite, coordinated by a dedicated project manager.
These are line items in our actual 2026 West Van quotes, not industry averages.
Heritage Ambleside and Dundarave
Heritage-designated homes in older Ambleside and Dundarave have an additional review layer for any renovation. The West Vancouver heritage board reviews proposed changes — even interior changes that don't affect the exterior — to confirm the work preserves the historical character.
For bathrooms, this typically means keeping original wainscoting, salvaging vintage hardware where serviceable, and matching new tile patterns to original-era styles. Our most common compromise: install modern plumbing and waterproofing behind the walls while preserving period-appropriate finishes on the visible surfaces. The heritage board review adds 2 to 4 weeks to the permit timeline but rarely changes the final cost beyond an additional $2K to $5K for the design coordination.
Above-highway homes and structural review
Chartwell, Cypress Park upper, and Whitby Estates homes built above the Trans-Canada Highway sit on sloped or terraced lots. For bathroom-only work, geotech review is typically not triggered — geotech is for foundation work, additions, or major structural changes. But the District of West Vancouver sometimes requires structural engineer review when significant cabinet and fixture relocation happens on an upper floor of a hillside home (the new load distribution can affect existing beam sizing).
Engineer review adds $1,500 to $4,000 to the project and 2 to 3 weeks to the permit timeline. We coordinate the engineer's site visit, the stamped drawings, and the permit submission as a single package.
Planning a luxury bathroom remodel in West Vancouver?
We walk the bathroom, talk through scope and finishes, and give you a fixed-price quote with full fixture and finish schedule lined out.
Book ConsultationOr call us at 236-516-3566
Frequently asked questions
How much does a luxury bathroom cost in West Vancouver?+
$50,000 to $150,000+. Premium guest bath: $50K–$75K. Full master: $75K–$110K. Full spa-level master suite with book-matched stone, steam shower, and smart fixtures: $110K+.
Do above-highway homes need geotech?+
Geotech review is typically not triggered by bathroom-only work — it's for foundation work, additions, or major structural changes. But the District sometimes requires structural engineer review when significant cabinet and fixture relocation happens on an upper floor of a hillside home.
Do you handle heritage-designated homes?+
Yes. Heritage Ambleside and Dundarave homes need design review through the West Vancouver heritage board. We coordinate with the heritage board before permit submission, preserve original character, and modernize the systems behind the finishes.
How long does it take?+
Six to ten weeks of build, on top of 6 to 12 weeks of custom millwork and stone fabrication lead. We sequence rough-in trades during the lead window so install moves fast once materials arrive.
